Pbx Compatibility - Comdial DX-80 Installation & Maintenance Manual

•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

PBX Compatibility

The DX-80 system may be installed as a subordinate of a host PBX. In this connection arrangement users access
PBX facilities via a DX-80 CO line button. To make a PBX call, (PBX extension numbers and trunks) the user
accesses the PBX port via line button and dials the appropriate PBX code.
The DX-80 can be programmed to recognize the code used to access PBX trunks on PBX Type CO ports. This code
identifies the type of call being placed so that call control can be administered. When the PBX code is recognized, the
DX-80 system will invoke automatic conditioning of calling for redial features and administer Class Of Service
characteristics as programmed for each user.
Related Features
Automatic Redial
Last Number Redial
Memo Pad
Saved Number Redial
Related Programming
CO Line – CO Line Type (see CO Line Type Assignment).
CO Line – CO Group (see CO Line Groups).
Call Handling – CO Flash Time (see Flash – CO Line).
Call Handling – PBX Flash Time (see Flash – PBX Line).
Call Handling – Pause Time (see Pause Insertion).
Call Handling – PBX Auto Pause (see Pause Insertion)
CO Line Application - PBX Code, Search Order
System Resource - Speed Number Programming (see Speed Dial)
Conditions
a) When the PBX CODE is programmed, the DX-80 will apply extension toll restriction(s) when the code is
dialed.
b) LNR and AR will recognize the code and automatically insert a pause following the code when used.
c) The PBX access code can be 1 to 4 digits.
Default Settings
CO Line Application – PBX Code = 9. (Range is any number up to four digits.)
CO Line Application – Search Order = SEQL. (Range is SEQF/SEQL/RAN.)
Programming Abstract
•
Program the PBX Code required to access, PBX Trunk dial tone. (If different than "9.")
•
Program the Search order of PBX circuits (for group access).
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
CO Line Type Assignment
Speed Dial - System, Extension
Flash
3-183
M 03/01
ANUAL