Call Back - Co Line; Cbck ] - Comdial DX-80 Installation & Maintenance Manual

Conditions
del
a) If you press [ ] during the Call Back Alert ringing, the Call Back will be cancelled and the LCD will
display:
Your extension will return to an idle status.
b) To invoke a Call Back at an extension that is in the Voice Announce mode, you must first Force Tone
'
Ringing ( ).
c) If the Call Back is not answered during the reply alert ringing, the response message will be displayed until
reply
you press either [
d) The Call Back process begins when both your extension and the called party's extension are in an idle, on-
hook mode.
Call Back – CO Line
This feature allows you to queue a busy CO line and reserve that CO line for use when it becomes available. This
feature eliminates the need for you to continually observe the line status for availability. You may only have one Call
Back active at any time.
Related Features
Call Back – Cancel All ( F##)
Related Programming
CO Line Assignment
Operation
1. Press a busy (solid Red LED) CO Line or CO Line group button, or dial a CO Line access group number (9,
800-806, 740~755). While the busy tone sounds, the display will read:
cbck
2. Press [ ] Interactive Soft Button or Dial [#] on the dial pad.
Confirmation tone will be heard and the display will read:
A few moments later, the display will return to an idle state.
When the selected CO Line, or a CO Line in the selected CO Line group becomes available, fast ringing will
be heard at the extension and the display will read:
reply
3. Press [ ] to be connected to available CO Line, and dial the appropriate number or
del
4. Press [ ] to delete the CO Line callback if necessary.
To Cancel all Active Call Backs Prior to Receiving Call Back Alert Ringing:
!,,
Press .
Analog Ports (Single Line Telephones)
When you try to access a CO Line and get a busy tone, dial
P7290 IMM
DX-80 I M
NSTALLATION AND
CBCK DELETE XXX
del
], or [ ].
CO LN BUSY XXX
CBCK TO LINE
CBCK TO LINE XXX
reply del
3-40
M
AINTENANCE ANUAL
XXX
#
.
[ ]
cbck