Enhanced Lettering Scheme - Comdial DX-80 Installation & Maintenance Manual

•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Enhanced Lettering Scheme

Extension User Names, CO Line Names, Pre-Programmed Messages, and UCD Names (programmed into the
customer database) may be enhanced for special requirements using the choices available in the Letter Schemes.
The end user may select from eight different lettering schemes that can be programmed for use at any one
installation. While these names are being entered (in database programming) and while the user is editing an
Outgoing Message, the chosen Letter Scheme characters will be accessible with successive depressions of the "1"
dial pad key. Use the following table to determine what letter scheme best suits this installation.
Related Features
Extension User Names
CO Line Names
Pre-Programmed Messages
Related Programming
System Resource - CO Line Names
System Resource - User Name
System Resource - Preprogrammed Message
Extension Application - Uniformed Call Distribution - Name
Operation
Refer to the specific Name Feature to be programmed.
Conditions
Only one Letter Scheme can be active at one time.
Default Settings
System Application – Letter Type: is set to "0." (Range is: 0-7.)
Programming Abstract
Program the Letter Type for the special character set available via numeral 1 (dial pad digit key) for Name in
Display.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 08-02, then press [
chg
•
Press [ ] until the value for this data item displays
•
Press HOLD button to exit DISA programming and return to the previous menu level.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to the LETTER TYPE programming screen.
3-110
M M 03/01
AINTENANCE ANUAL
UCD Names
Alphanumeric Display
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password