Flash - Co Line - Comdial DX-80 Installation & Maintenance Manual

•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "Call Handling." Then press «.
•
Use ¢£¤¥ to highlight "Category 2." Then press «.
• Use ¢£¤¥ to highlight "SLT Hook Flash – Start" or "...End."
•
Press « until the appropriate timing displays.
•
Continue making other programming changes as required.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Flash – CO Line
Flash – CO Line is a programmed setting that will determine what flash timing will be presented to the telephone
company central office when the user issues a Hook-Flash command while connected to a CO Line. This feature is a
requirement when the DX-80 is installed "behind" Centrex
code should be programmed onto a Flexible Feature Button for easy access.
If Call Waiting service is provided you can use the Flash feature to answer a second incoming call while connected to
another outside party.
Related Features
Speed Dial (System and Station)
Last Number Redial
Related Programming
Call Handling – CO Flash Time
Operation
While connected to a CO Line, press
Line circuit.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
®
or a PBX system. In these two cases, the Flash feature
!3
. The programmed hook-flash is invoked on the connected CO
3-131
M 03/01
ANUAL
to return to the DB Item Selection
Memo Pad
Automatic Redial