Comdial DX-80 Installation & Maintenance Manual page 113

Program extensions for CO Line Access. (Index 02-ccc-03, where "ccc" = the CO Line Directory number
[740-755]):
•
Input 02-ccc-03 to program CO Line "ccc" – Line Group.
save
•
Press [ ]. This advances to CO Line Group for CO Line "ccc."
chg
•
Press [ ] until the appropriate CO Line Group displays for this CO Line.
•
Press (up or down) to return to the DB Item Select screen and input another CO Line
Or...
•
Press the
show
•
Press [ ].
next
•
Press [ ] twice to advance to the CO Line Group programming for the CO Line selected.
•
When finished programming CO Line Groups, press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "CO Line." Then press «.
• Use ¢£¤¥ to highlight "Category 1." Then press «. (Notice the display header "CO Line Category 1 :
[1/2]." The "[1/2]," indicates that this is the first of two pages for this database programming. Page 1 shows
the programmable database items for CO Line ports 1-8 (CO Lines 740-747).)
•
Use the ³ and ´ buttons on the PC keyboard to select the screen for the CO Line(s) to be programmed.
•
Use ¢£¤¥ to highlight the CO Group assignment for the appropriate CO Line. (CO Lines are listed along
the left side of the display.)
• Press « to change the data item value.
•
Input the appropriate CO Line Group number (1-8) then press
•
Continue programming other database items as required.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
P7290 IMM
DX-80 I
NSTALLATION AND
to select another CO Line to be programmed.
3-64
M M 03/01
AINTENANCE ANUAL
(up or down) to return to the DB Item Select
Enter
to store the data.