Hold - Common (System) & I-Hold Indication - Comdial DX-80 Installation And Maintenance Manual

Operation – Storing the Code
1. While the telephone is idle, access Flexible Feature Button Programming (
feature button to be stored with your Hidden Code.
chg chg chg chg
2. Press [ ].
feat feat feat feat
3. Press [ ].
!61
4. Press
save save save save
5. Press [ ].
6. Exit Flexible Feature Button Programming.
Operation – Using the Hidden Code
1. Access the voice mail system (either the DX-80 Voice or an external voice mail system).
2. When you hear the prompt to enter your password, press the Hidden Code button.
Conditions
The Hidden Code feature can only be used when stored on a Flexible Feature button.
Hold – Common (System) & I-Hold Indication
You may place any CO line on System Hold by pressing the
the green lamp for that line will flash at the I-Hold rate. This system-hold line will flash the red lamp at all other
extensions.
I-Hold Indication allows you to easily distinguish between a call you placed on hold at your telephone and calls placed
on hold at other telephones. When you place a call on System Hold, the associated line lamp will flash at the System
Hold rate using the green lamp to indicate that this is your holding line. The same held CO line at other extensions
will flash at the System Hold rate using the red lamp.
Related Features
Call Transfer
Hold Abandon
Related Programming
Call Handling - Hold Recall, Hold Reminder, Ex_Hold Time
Operation
1. While on a line, the green lamp for that line is I-Use flashing (double wink rate).
the Hold button
2. Press
Analog Ports (Single Line Telephones)
1. While on a line, press {FLASH} (hook-switch flash).
2. Hang up. The line is placed on System Hold.
P7290 IMM
DX-80 I
NSTALLATION AND
AVAILABLE KEY
chg
SELECT FUNCTION
dir feat
FTR CODE:_
bksp save chg
+ {the four-digit code to store}.
. The green lamp now flashes at a slow rate and the call is placed on System Hold.
3-154
M M
AINTENANCE ANUAL
!/3
Hold
button. When you place a line on System Hold,
Hold Reminder
) then press the