Table of Contents
Advertisement
Interrupting the plotting operation
To interrupt the plotting operation, stop the carriage and erase (the receive data) from the
device.
STEPS:
1. Press the [REMOTE] key to stop the plotting
operation.
2. If data is being transmitted from the computer
to the device, stop the data transmission.
3. Press the [DATA CLEAR] key.
The data that has been received is erased.
4. Press the [ENTER] key.
The device enters the LOCAL mode.
- 2.27 -
< LOCAL >
width : 1272 mm
DATA CLEAR
< ENT >
< LOCAL >
width : 1272 mm
Advertisement
Table of Contents
