Table of Contents
Advertisement
When not in use the plotter over the long term [STATION]-[CUSTODYwash]
When not in use the plotter over a week, perform "CUSTODYwash" function to clean the
head nozzle and ink discharge way.
After performing the function, store the plotter.
Cleaning tools
•
Cleaning Solution RS (SPC-0336), Pipette
•
Glove, Goggle
STEPS:
1. Select the [STATION].
page 5.2.
2. Press the [ENTER] key.
3. Press the Jog key [ ] or [ ] to select the
[CUSTODYwash].
4. Press the [ENTER] key.
The carriage moves to the platen.
5. Open the front cover.
6. Holding the projections at both ends, draw out
the wiper.
- 5.9 -
MAINTENANCE
STATION
< ent >
STATION
MENT : CARRIAGEout
STATION
MENT : CUSTODYwash
Wiper Cleaning
COMPLETED
:ent
Advertisement
Table of Contents
