Table of Contents
Advertisement
Maintenance of the device
The term "maintenance" as used herein refers to the operation that has to be performed to
keep the device in good operating condition.
To carry out maintenance of the device, select [MAINTENANCE] from the FUNCTION
menu and make the necessary settings.
Invoking a maintenance function
In order to execute any of the maintenance functions, it is necessary to perform the follow-
ing operation on the operation panel.
You have to understand how to invoke the desired maintenance function to carry out main-
tenance.
STEPS:
1. Make sure that the mode is LOCAL mode.
2. Press the [FUNCTION] key.
3. Press the [ ] or [ ] key to select the
[MAINTENANCE].
4. Press the [ENTER] key.
5. Select the next operation.
Set up the desired maintenance function to carry out mainte-
nance.
page 5.3
- 5.2 -
< LOCAL >
width : 1272 mm
FUNCTION
SET UP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
STATION
< ent >
Advertisement
Table of Contents
