Interrupting The Printing Operation - MIMAKI Tx2-1600 Operation Manual

5. Press the [ENTER] key to return to the
REMOTE display.
The changed setting value is saved. The value is to be in effect
performing till the turning off.
Press the [END] key to return to the REMOTE display.
The changed setting value is to be in effect performing till the
turning off.
• In case the setting value has changed before,
the indicate gives [+] mark beside of the TYPE.
In the same way, the indicate gives [-] mark
beside of the TYPE when the setting value
has changed.

Interrupting the printing operation

To interrupt the printing operation that has been started, stop the carriage and erase (the
receive data) from the printer.
STEPS:
1. Press the [REMOTE] key to stop the printing
operation.
2. If data is being transmitted from the computer to
the printer, stop the data transmission.
3. Press [DATA CLEAR] key.
The data that has been received is erased.
4. Press [ENTER] key.
The mode enters the LOCAL mode.
- 2.10 -
< R E M O T E >
T Y P E 1 + 0 . 0 m
< R E M O T E > V 3 6 0 x 3 6 0
T Y P E 1 + * * . * m
< < L O C A L > >
w i d t h : 1 2 7 2 m m
D A T A C L E A R
< E N T >
* * DA T A C L E AR * *
< < L O C A L > >
w i d t h : 1 2 7 2 m m