Interrupting The Printing Operation - MIMAKI JV5-130S Operation Manual

CHAPTER 3 Print Output

Interrupting the printing operation

To interrupt the printing operation, stop the carriage by pressing the [REMOTE] key and erase the received
data from the printer.
The next time the printer enters REMOTE mode, it would start printing with the data that was interrupted
if the data has not been erased.
STEPS:
1
Press the [REMOTE] key to stop the printing operation.
The printer returns to LOCAL mode.
If data is being transmitted from the computer to the printer, stop the data transmission.
2
Press the [DATA CLEAR] key.
The data that has been received is erased.
3-42
PRE PRT AFT
35°C 40°C 50°C
DATA CLEAR
<ENT>
PRE PRT AFT
35°C 40°C 50°C
L. ∗ >
[JV5-01]
width : ∗∗∗∗ mm
Printing an image
PRE PRT AFT
35°C 40°C 50°C
∗ ∗ DATA CLEAR ∗ ∗