D Receiving A Position Request Call - Icom GM600 Instruction Manual

[Pause]: Pauses the countdown.
• To restart the countdown,
push [Resume]
[Accept]: Enters the DSC Task mode.
DSC Task mode
• Monitor the channel specified by the
calling station for an announcement
from the calling station.
(Example: Channel 16)
• Rotate [CH/ENT] to view the call
contents.
r Push [Standby Mode]
to the Main screen.

D Receiving a Position Request Call

NOTE: When "Position ACK" is set to
"Auto (Able)," the transceiver automatically
replies to the call. Both the TX and RX
.
calls are stored in the Transmitted and
Received Call Logs. (Default: Manual)
q When a Position Request call is received:
• An alarm sounds.
• The following screen is displayed.
• The backlight blinks when the BAM
function (p. 20) is OFF.
w Push any [Close]
• When the BAM function (p. 20) is
to return
OFF: Push any [Alarm OFF]
e Select your desired action.
[Hold]:
Holds the RX call task, and return to
the previous screen.
[Able]:
Sends an acknowledgment with
position and time data.
[Unable]:
Sends an acknowledgment with no
position and time data.
[Accept]:
Enters the DSC Task mode.
.
• Rotate [CH/ENT] to view the call
.
contents.
r Push [Home]
Main screen.
TIP: See page 54 for details of
sending an acknowledgment.
8
DSC OPERATION
DSC Task mode
to return to the
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
69