Table of Contents
Advertisement
7
DSC OPERATION
■ Receiving DSC calls
D Receiving a Pfsitifn Request call
NOTE: When "Position ACK" is set to "Auto," the
transceiver automatically replies to the call. In that
case, both the TX and RX calls are stored in the
Transmitted and Received Call Logs. (Default: Manual)
1. When a Position Request call is received:
• Alarm sounds.
• The following screen is displayed and the backlight blinks.
• "
" is displayed and "
Push [Alarm Off]
2. Select your desired action.
[Hold]:
Push [Hold]
screen.
[ACK]
Push [ACK]
acknowledgement.
[Accept]: Push [Accept]
Task mode.
L Rotate [CH/GRP] to confirm the call contents.
L See page 29 for details of the software key functions
in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
TIP: See page 51 for details on sending an
acknowledgement.
65
" blinks.
.
to return to the Main
to send an
to enter the DSC
to return to the
D Receiving a Pfsitifn Request
acknfwledgerent
1. When a Position Request acknowledgement is
received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• "
" is displayed.
Push [Alarm Off]
.
2. Push [Close Call RCVD Window]
L Rotate [CH/GRP] to confirm the call contents.
L See page 29 for details of the software key functions
in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
.
Push
any
to return to the
Advertisement
Table of Contents
