Dsc Operation - Icom IC-M92D Instruction Manual

DSC address ID
■
D Programming Individual ID
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
Enter "INDIVIDUAL ID" in the DSC SETTINGS menu.
q
➪ DSC Settings 
MENU
(Push [MENU]) (Push [Y]/[Z], then push [ENT].)
Push [ADD].
w
• The "INDIVIDUAL ID" program screen is displayed.
Enter a desired individual ID in the following instruction:
e
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT].
The first digit is specified as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Repeat step e to enter all 9 digits.
r
➪ Individual ID

DSC OPERATION

After entering the 9 digit code, push [ENT] to set it.
t
• ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following instruction:
y
• Select a desired character using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT].
• Push [123] then [!$?] then [ABC] to select a character group.
After entering the ID name, select "FINISH" by pushing
u
[Y]/[Z]/[Ω]/[≈], then push [ENT] to program it.
The "INDIVIDUAL ID" list screen is displayed.
i
• Push [MENU] to exit the MENU screen.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20