Machine Modes
You will be prompted to touch various areas of the screen.
When the calibration is successful, the message "Calibration successfully
completed...Thank You" is displayed.
2. Select Touch Screen Test.
You will be prompted to draw something on the screen by touching the screen
with your finger and moving it about the screen.
3-62
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
USA MAV500/MKVI Service Manual
28-00486-00