Ribbon Cassette Replacement - Aristocrat USA MAV500/MKVI Service Manual

Ticket Printer

17.2.2 Ribbon Cassette Replacement

To replace the ribbon cassette (refer to Fig 17-5):
1. Open the cabinet door, and switch OFF the machine.
2. Lift the bail, and remove the used cassette by pulling it from the chassis and off
the drive pin.
3. Before inserting the new cassette, turn the knob anti-clockwise until the ribbon
is taut.
4. Open the bail; mount the cassette onto the drive pin whilst keeping the ribbon
between the platen and the print head. When the cassette is properly mounted it
will snap onto the chassis.
5. Make sure the ribbon is threaded through the guide slot and is taut.
6. Lower the bail. The ribbon cassette is now loaded.
17-12
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Note
Use only the specified ribbon cassettes to
ensure print quality and ribbon life.
Figure 17-5 Replacing the Ribbon Cassette
USA MAV500/MKVI Service Manual
28-00486-00