Aristocrat USA MAV500/MKVI Service Manual page 276

I/O Driver Board
11.4 Connector Pin Assignments
The I/O Driver Board connects to the Backplane via two 64-way DIN connectors,
labelled J1 and J2, and a 96-way DIN connector, labelled J3.
Connector J1 includes most of the main I/O lines such as pushbutton lamps and
switches, light tower lamp outputs, animation lamp outputs, hard-meter outputs, and
all spare I/O lines whether they be driver outputs, simple TTL I/O, or serial
communication lines.
PIN
A1 GND
B1 GND
A2 PBS1
B2 PBS2
A3 PBS3
B3 PBS4
A4 PBS5
B4 PBS6
A5 PBS7
B5 PBS8
A6 PBS9
B6 PBS10
A7 PBS11
B7 PBS12
A8 PBS13
B8 PBS14
A9 SPARESW1
B9 SPARESW2
A10 PBL1
B10 PBL2
A11 PBL3
B11 PBL4
A12 PBL5
B12 PBL6
A13 PBL7
B13 PBL8
A14 PBL9
B14 PBL10
A15 PBL11
B15 PBL12
A16 PBL13
B16 PBL14
A17 DRVSP1
B17 DRVSP2
A18 SPAREIO0
B18 SPAREIO1
A19 SPAREIO2
B19 SPAREIO3
A20 SPAREIO4
B20 SPAREIO5
A21 SPRTS
11-14
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Table 11-5 J1 Connector Pinout
Pin Name
Ground
Ground
Pushbutton Switch 1
Pushbutton Switch 2
Pushbutton Switch 3
Pushbutton Switch 4
Pushbutton Switch 5
Pushbutton Switch 6
Pushbutton Switch 7
Pushbutton Switch 8
Pushbutton Switch 9
Pushbutton Switch 10
Pushbutton Switch 11
Pushbutton Switch 12
Pushbutton Switch 13
Pushbutton Switch 14
Spare 24V Input 1
Spare 24V Input 2
Pushbutton Lamp 1
Pushbutton Lamp 2
Pushbutton Lamp 3
Pushbutton Lamp 4
Pushbutton Lamp 5
Pushbutton Lamp 6
Pushbutton Lamp 7
Pushbutton Lamp 8
Pushbutton Lamp 9
Pushbutton Lamp 10
Pushbutton Lamp 11
Pushbutton Lamp 12
Pushbutton Lamp 13
Pushbutton Lamp 14
Spare 24V output 1
Spare 24V output 2
Spare TTL I/O
Spare TTL I/O
Spare TTL I/O
Spare TTL I/O
Spare TTL I/O
Spare TTL I/O
Spare serial
USA MAV500/MKVI Service Manual
Comment
28-00486-00