Technical Description - Aristocrat USA MAV500/MKVI Service Manual

USA MAV500/MKVI Service Manual

17.1 Technical Description

17.1.1 Physical Description
The printer module is located at the bottom of the cabinet, in place of the hopper. It
is positioned by a guide plate on the floor of the cabinet and is secured by two screws.
The printer interfaces with the machine logic via a 20-way loom that connects to P7
on the Backplane. This connector is alternatively used for the hopper signals.
Machines may be fitted with either a hopper or a printer, not both. Figure 17-1 shows
the location of the printer module.
28-00486-00
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Note
The information provided in this chapter is a
general overview of the Westrex serial printer.
Full servicing details can be obtained from the
Westrex Service Manual.
Figure 17-1 Location of Printer
Ticket Printer
17-3