Touchscreen Specifications; Notes On Handling - Aristocrat USA MAV500/MKVI Service Manual

Video Monitor

8.7.4 Touchscreen Specifications

Power Requirement
Power Consumption
Resolution
Baud Rate
Response Time
Touch Contact Requirement
Accuracy
Output Communications
Operating Temperature Range
Operating Humidity Range

8.7.5 Notes on Handling

The touchscreen has black tape protecting the electrodes at the edge of the screen.
This tape must not be removed.
When unpacking a monitor, always lift directly out of the carton and place base-down on
a flat bench.
If you need to place the monitor face-down, make sure there is sufficient padding on the
bench and no stray pieces of metal or sharp objects around, so as to prevent scratching of
the touchscreen face.
NEVER "roll" the monitor from being base-down to facedown, as the edges of the
touchscreen are delicate and the overall weight of the monitor is substantial. There is a
very good chance you will crack or break the edge of the touchscreen, rendering it
useless. When installing the monitor into your machine, take care not to knock or bang
the taped edges of the touchscreen - this area is delicate.
Check the cabinet door to ensure that no pressure is applied to the taped area. Excessive
pressure on the taped area may result in edge breakages or vibrational wear damage to
the electrode pattern. Never slam the cabinet door onto the screen.
The monitor must ALWAYS be transported in the original packaging. Monitors
returned to MicroTouch Australia for repairs will only be accepted if they are returned in
the original packaging. This is to provide maximum protection for the monitor, and
minimise the chances of any freight damage.
Periodically clean the touchscreen with water, isopropyl alcohol, Windex, or a similar
non-abrasive cleaner. Ensure the use of grit-free cleaning cloths.
8-14
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
12 V DC
Less than 2 W
1024 x 1024 touchpoints
2400 baud between controller and game
8 ms – 15 ms
3 ms
±1% error
Bi-directional asynchronous RS-232C serial
communication
32°F to 131°F (0°C - 55°C)
0-95% non-condensing
CAUTION
There is also the associated safety risk of tube
implosion when shipped in inadequate packaging
USA MAV500/MKVI Service Manual
.
28-00486-00