Description Of Connectors - Aristocrat USA MAV500/MKVI Service Manual

Main Board
4. Lever the PCBA out of the runners using the board extractors, and withdraw the
board from the logic cage.
5. The PCBA should be placed in an antistatic bag immediately.
Replacement
Replacement is a reversal of the removal procedure. Both sides of the replacement
PCBA should be inspected for any signs of physical damage.

10.6 Description of Connectors

The following tables show the details of the principal external connectors on the
Aristocrat Main Board (No. 2501-410557). Details of pinouts are provided.
No. Name
J1 Fan
J2 COMM SCIF
J3 CCB
J4 JTAG FPGA
Byteblaster
J5 PMC-Panel 1
J6 PMC-Panel 2
J7 Smart Card I/F
J8 ICE
J9 Memory Expansion
J10 Emulator
J11 External Battery
J12 Memory Expansion
J13 Emulator
P20 Opto Isolated
Connector
P21 Miscellaneous
Connector
P22 Security and I/O
Expansion
Connector
10-24
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002
Note
You must place a fault tag on any faulty boards.
Table 10-7 Description of Connectors
Type
4-way header
Male straight 6 way DIL
header
72 pin SIMM socket
Male straight 10 way DIL
header
Female straight 64 way
miniature PMC
Female straight 64 way
miniature PMC
Male straight 6 way DIL
header
Male straight 14 way DIL
header
48 way female straight
DIN41612 Socket
21 way header
4-way header
Female straight 96 way
DIN41612 connector
21 way header
Male right angle 96 way
DIN41612 connector
Male right angle 96 way
DIN41612 connector
Male right angle 96 way
DIN41612 connector
USA MAV500/MKVI Service Manual
Function
Connector to fan for video processor
Optional spare serial port (SCIF)
Interface to Communications
Configuration Board
Used in product development - not used
in finished products
Optional PCI mezzanine plug-in board
Optional PCI mezzanine plug-in board
Optional Smart Card interface or
Diagnostic Terminal
In-Circuit Emulator for inspection of
registers and memory
Interface to optional Memory Expansion
Board
Used in software development
Connector for external battery
attachment during on-board battery
changeover.
Interface to optional Memory Expansion
Board
Used in software development
Connector to Backplane Board
Connector to Backplane Board
Connector to Backplane Board
28-00486-00