Bill Acceptor
9.5.2 Physical Description
The embedded bill acceptor consists of an optical and magnetic scanning unit linked
to a Transport and Cash Box assembly for the entry and storage of a range of bill
denominations. The bill acceptor cage assembly, which houses the bill acceptor and
stacker, is located on the right-hand side of the cabinet.
The bill entry channel is situated on the gaming machine mid trim, together with the
coin entry and bill-denomination display panel. The bill acceptor stacker can be
accessed for removal by opening the gaming machine belly panel door, unlocking the
stacker cage, and then withdrawing the stacker.
9-20
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Figure 9-12 JCM Bill Acceptor Assembly Components
USA MAV500/MKVI Service Manual
28-00486-00