Coin Chute Assembly
Debris Flap
6.3.3 Cleaning Procedure
Equipment needed.
Short bristle paintbrush or toothbrush.
•
Clean lint free cloth.
•
Pozidrive torque screwdriver and flat-blade screwdriver.
•
Cotton buds.
•
Water based mild detergent i.e. dish washing liquid and water.
•
Do not use solvents instead of the detergent.
•
6-14
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Coin Entry
Accepted
Coins
Figure 6-6 Condor Coin Validator
USA MAV500/MKVI Service Manual
Locating Pin
(4 off)
Connector
(unused)
Connector
for Loom
to Machine
Rejected
Coins
28-00486-00