Physical Description - Aristocrat USA MAV500/MKVI Service Manual

USA MAV500/MKVI Service Manual

7.1 Physical Description

The Aristocrat Disc Hopper (ADH) is mounted onto a base plate that slides into a
guide plate on the base of the cabinet (see Figure 7-1). It is locked in position by a
spring-loaded release pin.
When the hopper is pushed into position, a socket at the back of the hopper
automatically connects to a plug on the cabinet base. This socket provides power and
control signals to the Hopper PCBA, which controls the hopper.
The Hopper PCBA drives a 24 V DC motor, which rotates the disc within the hopper
through the gearbox. The motor and gearbox are one assembly and are replaced as
one unit.
Top Handle
Side Handle
Guide
28-00486-00
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Spring Loaded
Release Pin
Removal Path
Figure 7-1 Hopper Location
Guide
I0168a
Hopper Platform
Hopper
Position
of the
Bill
Acceptor
7-3