Table 1-2 Machine Keys - Aristocrat USA MAV500/MKVI Service Manual

General Description
Machine Keys
The gaming machine requires keys for the following locks and switches to establish
effective security and correct operation. A key may only be removed from its lock or
key switch after it has been returned to the locked position. Refer to Figure 1-1 for
lock and keyswitch positions.
Name
Cabinet Door
Lock
Audit Key Switch
Jackpot Reset
Keyswitch - also
called the Cancel
Credit Key
Switch
Belly Panel Door
Logic Cage Lock
(if fitted)
Bill Acceptor
Cage Door
Lock(s)
(optional)
Bill Acceptor
Stacker Lock
Note: All security door locks are 5/8-inch diameter and extend into the cabinet ½-inch.
Spacers must be added if longer locks are used.
1-8
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.

Table 1-2 Machine Keys

Allows the operator to open the cabinet door.
Insert the cabinet door key and turn it 180° clockwise, then the door will
"pop" open.
Enables entry to the Operator Mode Menu (see Machine Modes).
Insert the Audit Key and turn it 180° clockwise.
Allows the operator to reset the machine after a machine fault has been
corrected (see Machine Modes).
Insert the Cancel Credit key, turn it 90° clockwise then back again.
Allows the operator access to the bill acceptor note stacker and door
fluorescent tube.
Allows the operator access to the PCB logic cage.
Insert the logic cage key and turn it 180° clockwise.
Allows operator access to the bill acceptor stacker lock(s) and to
remove the stacker.
Turn keys 180° clockwise to open.
Allows the operator to remove the notes from the stacker.
Insert the key and turn it 90° clockwise, open the door and remove the
notes.
USA MAV500/MKVI Service Manual
Function
28-00486-00