Aristocrat USA MAV500/MKVI Service Manual page 102

USA MAV500/MKVI Service Manual
SPC Identification
SPC Configuration Screen.
This screen allows the operator to control certain aspects of the SPC-2 interface
firmware. These options do not affect the operation of the Gaming Machine and have
no affect when an SPC-1 is connected. These options only affect the connected SPC-
2 interface board.
[Please consult the configuration documentation for a more detailed description of the
usage and affects of these options in conjunction with the SPC-2 interface board and
firmware.]
The following options are available:
SPC ID NUMBER: This option allows the operator to configure an Id number for the
SPC-2 firmware. This is generally used to indirectly set the SAS Poll address, and
replaces the use of the Game Machine ID for purposes of setting a SAS Poll address.
HANDPAY MODE: This affects the way in which handpay exceptions and data are
reported to the SAS Host by the SPC-2 interface board.
VALIDATION MODE: This affects the validation mode in which the SPC-2
operates, and the options available are indirectly limited by the configuration of the
Gaming Software, including whether a printer is selected, and whether Game or
System Validation has been selected on the Game Machine Options Menu screen.
SINGLE/DUAL PORT: When supported by the SPC-2, this option allows the
operator to configure the SPC-2 for single or dual port operation. When Dual Port
operation is selected, the following five options can be set to specify which
28-00486-00
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
SPC CONFIGURATION SCREEN
H/W Rev.: " "
Firmware Id: " "
Firmware Ver: " "
Firmware Name: " "
SPC ID NUMBER
HANDPAY MODE
SINGLE/DUAL PORT
EFT
PROGRESSIVES
SYSTEM BONUSING
VALIDATION
GENERAL CONTROL
Press 5 Lines Press to select another digit
–
Press 10 Lines Press to increment a digit
–
Bet 10 Credits Press to return to previous menu
–
Audit Key Turn off to exit
–
0
Basic Handpay Reporting
Port 0
Port 0
Port 0
Port 0
Port 0
Port 0
Save Options
Machine Modes
3-73