Aristocrat USA MAV500/MKVI Service Manual page 360

Ticket Printer
bail. You may need to help feed the paper into the feed mechanism (through
the guide slot) until it is picked up by the feed mechanism.
6. Lift the bail and pull both plies out of the bail slot.
7. Separate the two plies and guide the journal paper back through the bail slot,
then up and through the journal slot.
Split the journal spool, wrap the paper over the spool ①, then clip the other end
8.
of the journal spool over the paper and spool to secure it ②. Advance the
journal spool by hand until the journal paper is taut.
9. Guide the receipt paper back through the bail slot and close the bail. Press the
Cut switch (shown in Fig 17-2) to verify.
10. The paper is now loaded.
17-10
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
USA MAV500/MKVI Service Manual
28-00486-00