Aristocrat USA MAV500/MKVI Service Manual page 204

Bill Acceptor
9.6 Installation and Machine Conditions
9.6.1 Configuration Setup
Bill Acceptor configuration options are established by the use of DIP switches on the
bill transport unit and the Operator Mode Menu settings. To enable bill
denominations, it is necessary to set the required bill values in both the bill acceptor
DIP switches and the Operator Mode menu options.
The DIP switch locations vary between manufactures. See the relevant section of this
manual for details.
The settings for accepted bill denominations are found in the Operator Mode Menu
⇒ Operator Setup / Selections Menu ⇒ Machine Options (refer to Chapter 3 -
Machine Modes for more information).
9.6.2 Machine Condition Indicators
Bezel LEDs will extinguish when the gaming machine disables the bill acceptor (door
open, etc.). The LEDs should be
when it is unable to function.
Conditions producing lockups are shown on the game screen. The alarm sounds for
error conditions.
Operator Mode Menu Indicators
Several Operator Mode menu displays provide bill acceptor information that
addresses bill entry history, machine status, accounting/audit/statistics data, and error
and lockup information (refer to Chapter 3 - Machine Modes for further information).
9-24
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
USA MAV500/MKVI Service Manual
when the bill acceptor is ready to accept and
ON OFF
28-00486-00