Aristocrat USA MAV500/MKVI Service Manual page 81

Machine Modes
Hopper Test
Select this test to verify that the coin hopper ejects the correct number of coins.
1. Operate the Audit key.
2. Open the main door and select Hopper Test from the Test/Diagnostics menu.
3. Press Service or Cashout/TakeWin to set the desired number of coins to be
ejected from the coin hopper.
4. Press the appropriate button as shown on the screen to activate the hopper
payout.
5. Verify that the appropriate number of coins have been ejected from the hopper.
6. Close the main door and insert the coins back into the coin head.
3-52
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
TEST MODE – HOPPER TEST
Hopper Test Payout:
Coins Reinserted:
Last Hopper Event:
Last Diverter Event:
Bet 5 Credits
– Press to activate payout
Service – Press to increment payout
Cashout/TakeWin – Press to decrement payout
Bet 10 Credits Press to return to previous menu
–
Audit Key Turn off to exit
–
Note
If a fault such as hopper empty occurs, a
message is displayed on the screen.
USA MAV500/MKVI Service Manual
0 / 10
0
None
None
28-00486-00