USA MAV500/MKVI Service Manual
Comparator Bracket
- connects to underside
of door mid trim
Diverter Solenoid
Coin Diverter
Accepted
Coins into
Hopper
Accepted
Coins into
Cashbox
6.2.2 Functional Description
The comparator performs the following functions:
drives the sensor coils
•
monitors the pick-up coil for valid coins
•
activates the coin accept solenoid when a valid coin is detected
•
monitors the coin travel using photo-optic sensors
•
provides signals to the Main Board indicating when a valid coin has been detected,
•
when a coin has left the sensor assembly, and when incorrect coin travel has been
detected.
28-00486-00
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved. © Copyright (ATI) Aristocrat Technologies, Inc. 2002.
Sensor Assembly
Rejected
Coins into
Chip Tray
I0269.cdr
Spring-loaded Locating Tab
Figure 6-1 MC-62 Coin Chute Assembly - Location
Coin Chute Assembly
Reflector Panel
Loom to
Power Supply
Cutout for Hopper
Coin Chute
Plug break at
main machine
loom
6-5