Hardware Hookup - Crestron UPX-2 Operation Manual

Crestron UPX-2
Ear Attachment for Rack Mounting
Stacking
50 ¥ Universal Presentation Processor: UPX-2
4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the
opposite side.
Four "feet" are provided with the UPX-2 so that if the unit is not rack mounted, the
rubber feet can provide stability when the unit is placed on a flat surface or stacked.
These feet should be attached prior to the hookup procedure.

Hardware Hookup

Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to "Network Wiring" on page 19 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the UPX-2, use Crestron power supplies for Crestron
equipment.
Universal Presentation Processor
Operations Guide – DOC. 6276C