Crestron UPX-2 Operation Manual page 13

Universal Presentation Processor
Ethernet
Operations Guide – DOC. 6276C
The Functions menu may now be used to upload a project, update
firmware, and reset the network ID.
Crestron Toolbox Functions Menu
For complete instructions for establishing Ethernet communications, refer to
"Establishing Communication" on page 58.
1. To establish Ethernet communications, select Identity from the UPX-2
SETUP MENU.
"Network ID" Window
2. Copy the Hostname from the "Network ID" window.
3. Start Crestron Toolbox and open the address book by clicking
4. Select the existing UPX2 entry from the Address Book (for changing to a
TCP/IP entry) or click Add Entry and type a name for the new device
(UPX2-tcp-ip in our example).
5. Select TCP as the Connection Type and enter the Hostname in the IP
address field and click OK.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ xi
.