Extending The Vga And Usb Cables - Crestron UPX-2 Operation Manual

Crestron UPX-2
Connecting Multiple Touchpanels
52 ¥ Universal Presentation Processor: UPX-2
Some USB touchpanels may draw too much power, and prevent the UPX-2 from
booting up correctly. Use a powered USB hub to connect touchpanels that draw too
much USB power.
Only one third party touchpanel can be connected at any time.

Extending the VGA and USB Cables

The following diagram details the method of extending the USB and RGB (VGA)
cables for a DTT DualTouch Technology touchpanel when connecting to the UPX-2.
Crestron has successfully tested the following USB extenders:
•
I/O Gear model GUCE50.
•
Gefen model EXT-USB-200
NOTE: Do not use a hub with a USB extender.
Universal Presentation Processor
Operations Guide – DOC. 6276C