Crestron UPX-2 Operation Manual page 37

Universal Presentation Processor
Operations Guide – DOC. 6276C
Connectors, Controls & Indicators (Continued)
# CONNECTORS
CONTROLS &
INDICATORS
13 AUDIO (continued)
14 PC CARD A & B
15 RGB INPUT A & B
RGB INPUT
A
Pin 5
Pin 10
Pin 15
PIN DESCRIPTION
1 Red Video
2 Green Video
3 Blue Video
4 No Connect
5 Ground
(Continued on following page)
1
, DESCRIPTION
LINE OUT:
(1) 3.5 mm TRS mini phone jack (green);
Unbalanced stereo audio output;
Output Level: 1.0 V
Output Impedance: 10k ohms
Tip
Ring
Sleeve
Tip: Left Audio
Ring: Right Power
Sleeve: Ground
SPDIF:
(1) RCA female, coaxial digital audio output;
Impedance: 75 ohms
(2) Type II PC Card slots (front);
For memory expansion, project upload, and
wireless NIC*
* PQI FPC-PC.E and Kingston CF/ADP have been tested.
Contact factory for a current list of other compatible
devices. To ensure reliable performance, new device
drivers are available only from Crestron through firmware
updates.
(2) DB15HD female, RGB (VGA) inputs;
Analog Formats: RGBHV, RGBS and RGsB;
B
Pin 1
Pin 6
Input Resolution, Non-interlaced: 640 x 480
Pin 11
minimum to 1600 x 1200 maximum;
Input Levels: 0.5 to 1.5 V
restoration;
Input Impedance: 75 ohms;
Sync Input Type: Autodetect RGBHV, RGBS,
RGsB;
Sync Input Level: 3 to 5 V
Sync Input Impedance: 1k ohms;
Horizontal Frequency: 31.5 to 100 kHz;
Vertical Frequency: 60 to 85 Hz
(75 Hz limit at 1600 x 1200)
PIN DESCRIPTION
6 Ground
7 Ground
8 Ground
9 No Connect
10 Ground
Universal Presentation Processor: UPX-2 ¥ 15
Crestron UPX-2
;
rms
with built-in DC
p-p
;
p-p
PIN DESCRIPTION
11 No Connect
12 DOC Clock
13 Horizontal Sync
14 Vertical Sync
15 DOC Data