Crestron UPX-2 Operation Manual page 68

Crestron UPX-2
Sharing
46 ¥ Universal Presentation Processor: UPX-2
"Network ID" Window
NOTE: The hostname is required if a static IP address is not used.
Press Sharing to open the "Configure Shared Folders" window. This window is
used to set up shared folders. Sharing enables remote computers to view and/or
modify files stored on the UPX-2.
"Configure Shared Folders" Window
Click Add New Share... to browse and add directories with permission to read-only
or read/write. Click Close after adding all folders to be shared.
MISC. CONTROLS Details
The Misc. Controls section of the SETUP MENU contain the Diagnostics and Show
Keyboard buttons.
Press the Diagnostics button to display the firmware version number, control popup
messages and appearances, and to reset the end user license.
There are various types of popup messages. Following are definitions of each
message type:
•
Warning: An event occurred that may affect the normal operation of the
unit.
•
Error: An operation has failed.
•
Fatal: An event occurred which will require the unit to be reset.
Universal Presentation Processor
Operations Guide – DOC. 6276C