Crestron UPX-2 Operation Manual page 38

Crestron UPX-2
16 ¥ Universal Presentation Processor: UPX-2
Connectors, Controls & Indicators (Continued)
# CONNECTORS
CONTROLS &
INDICATORS
16 COMPACT FLASH
17 AUX COM
AUX COM
Pin 1
PIN MODE
Control Data Carrier Detect
1
2 Status Receive Data
3 Output Transmit Data
Control Data Terminal Ready
4
GND Signal Ground
5
* Contact factory for a current list of compatible devices. To ensure reliable performance, new
device drivers are available only from Crestron through firmware updates.
18 VIDEO INPUT 1/HDTV &
VIDEO INPUT 2
VIDEO INPUT 2
VIDEO INPUT 1/HDTV
B C
A A B
Y C Y
P
Y P Y P
B R
(Continued on following page)
Universal Presentation Processor
1
, DESCRIPTION
(1) Type II Compact Flash card slot;
For compact flash card containing firmware
and operating system (included).
NOTE: The UPX-2-1GB includes a 1GB
compact flash card while the
UPX-2-MSO-2007 includes a 4GB compact
flash card. UPX-2 models with 512MB
compact flash can be upgraded to the 1GB
compact flash with Crestron part number
UPX-OS1GB or the 4GB compact flash with
Crestron part number
UPX-OS4GB-MSO-2007. Both are available
from Crestron. For ordering information,
contact Crestron.
(1) DB9 male, bidirectional RS-232 port for
computer console and touch/mouse input*
Up to 115.2k baud;
Hardware and software handshaking support
Pin 9
FUNCTION PIN MODE
Control
6
7 Control
8 Control
Control
9
VIDEO INPUT 1/HDTV:
(3) BNC female;
C
Signal Types: Dynamically configurable
C
P
B R
under system control as: (1) Component
(YP P ) video input, or (3) Composite
b r
(NTSC/PAL) video inputs, or (1) S-video
(Y/C) input and (1) Composite input;
Formats: SDTV 480i (NTSC) & 576i (PAL),
EDTV 480p & 576p, HDTV 720p & 1080i;
Input Levels: 0.5 to 1.5 V
restoration;
Input Impedance: 75 ohms;
Horizontal Frequency: 15 to 45 kHz;
Vertical Frequency: 50 to 60 Hz
Operations Guide – DOC. 6276C
FUNCTION
Data Set Ready
Request to Send
Clear to Send
Ring Indicator
with built-in DC
p-p