Crestron UPX-2 Operation Manual page 18

Crestron UPX-2
xvi ¥ Universal Presentation Processor: UPX-2
WAV files that are assigned within a UPX-2 project. Font Files are fonts
that are part of a UPX-2 project.
Selecting Send Modified Files Only will only send files that are different
from those that are currently stored in the UPX-2. Note that if any pages in
the UPX-2 are not present in the project, those pages will be deleted from
the touchpanel.
The UPX-2 can be rebooted by clicking Reboot.
CAUTION: At power up or reboot, the touchpanel will cycle through
colors and the Crestron logo screen for approximately 2.5 minutes prior to
displaying the progress bar. This is a normal part of the boot up process. Do
not turn off power to the UPX-2 while it is rebooting. Damage may occur.
NOTE: Crestron Toolbox compares the time required to send the modified
files against the time required to send the entire project. Crestron Toolbox
will then select the package with the shorter transmission time.
8. Click the Browse... button to browse for a new compiled (.vtz) program.
"Open" Window
9. Select a file and click Open. When the "Project" window re-opens click
Send to send the project to the UPX-2.
To verify that the project has been transferred successfully, select Tools |
System Info. The new project information will appear in the "System Info"
window.
10. Connect to the control system as described in the latest version of the
2-Series Reference Guide (Doc. 6256) (available from the Crestron website
(www.crestron.com/manuals)) and send the compiled SIMPL Windows
program (.spz) to the control system.
NOTE: The SIMPL Windows program was created for the PRO2. If you
are using a different 2-Series control system, open the source file (.smw) in
SIMPL Windows and modify the program for your control system model.
Universal Presentation Processor
Operations Guide – DOC. 6276C