Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron CNX-BIPAD8
Summary of Contents for Crestron CNX-BIPAD8
- Page 1 Crestron CNX-BIPAD8 Professional Audio Distribution Processor Operations Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Crestron CNX-BIPAD8 Contents Professional Audio Distribution Processor: CNX-BIPAD8 Introduction Features and Functions Specifications Physical Description Industry Compliance Setup Network Wiring Identity Code Rack Mounting Stacking Hardware Hookup Typical Room Configurations Signal Distribution to More than Eight Rooms Expanded Distribution of Local Audio Sources... -
Page 5: Professional Audio Distribution Processor: Cnx-Bipad8
Functional Summary The CNX-BIPAD8 controls the selection of up to 24 stereo audio sources, and then distributes the audio to up to eight room amplifiers or Crestron room control boxes. The unit’s sixteen stereo head end audio inputs are RCA type connectors with loop through. - Page 6 Up to four units can be daisy-chained via the RCA loop-through connectors to extend distribution to up to 32 rooms. The CNX-BIPAD8 preamplifier circuits provide the following controls for each of the eight RCA outputs: Optional source and numeric keypads or any other Crestron network panel or touchpanel may be added to the individual rooms to interface with the CNX- BIPAD8.
-
Page 7: Specifications
Weight 6.2 lb (2.8 kg) The latest versions can be obtained from the Downloads | Software Updates section of the Crestron website (www.crestron.com). Refer to NOTE on the next page. Crestron 2-Series control systems include the AV2, CP2, CP2E, MP2, MP2E, PAC2, PRO2, and RACK2. -
Page 8: Physical Description
FTP site). Physical Description The CNX-BIPAD8 is housed in a black enclosure with labeling on the front and rear panels. Ten LEDs on the front panel indicate the unit’s current status. All connections are made to the back of the unit. Refer to the following illustrations of the front and rear panels and the physical views on the next page. - Page 9 3.469 in (8.811 cm) CNX-BIPAD8 Ports All connections to the CNX-BIPAD8 are made through the ports on the rear panel. Refer to the illustrations and descriptions, which follow. The 4-pin network connector is used to connect the CNX-BIPAD8 to the Cresnet system.
- Page 10 (TAB POSITION DOWN) NOTE: For additional information on audio/video connections over CAT5, refer to the latest version of the Crestron CAT5 Wiring Reference Guide (Doc. 6137) which is available from the Downloads | Product Manuals section of the Crestron website (www.crestron.com).
-
Page 11: Industry Compliance
Industry Compliance As of the date of manufacture, the CNX-BIPAD8 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling (N11785) NOTE: This device complies with part 15 of the FCC rules. -
Page 12: Identity Code
Windows program. Refer to “Setting the Net ID in Device Settings” on page 16 for details of the SIMPL Windows procedure. The NET ID of each CNX-BIPAD8 has been factory set to 44. The NET IDs of multiple CNX-BIPAD8s in the same system... -
Page 13: Rack Mounting
Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips). Two "ears" are provided with the CNX-BIPAD8 so that the unit can be rack mounted. These ears must be installed prior to mounting. Complete the procedure Operations Guide –... -
Page 14: Stacking
Ear Attachment for Rack Mounting (Side View of Unit) Stacking Four "feet" are provided with the CNX-BIPAD8 so that if the unit is not rack mounted, the rubber feet can provide stability when the unit is placed on a flat surface or stacked. -
Page 15: Typical Room Configurations
LEFT RIGHT CRESTRON ELECTRONICS INC. ROCKLEIGH N.J. 07674 USA AUDIO SOURCE FROM LOOP-THROUGH AUDIO (DAISY-CHAIN TO SOURCE ADDITIONAL BIPAD8 UNITS) Professional Audio Distribution Processor: CNX-BIPAD8 • 11 TO AUDIO CONTROL SOURCE(S) SYSTEM GND(S) SETUP 24 Y ROOMS LEFT RIGHT AUDIO TO... -
Page 16: Signal Distribution To More Than Eight Rooms
The sixteen sets of four RCA jacks connect independent audio sources to the CNX-BIPAD8. Of each set, two of the connectors are used for left and right audio channels; the other two are parallel stereo loop-throughs. The loop-through jacks can 12 •... -
Page 17: Expanded Distribution Of Local Audio Sources
However, if you wish to distribute local room source audio from rooms connected to the first CNX-BIPAD8 to rooms connected to a second CNX-BIPAD8, you need to use the CNX-PBAR4 as shown in the diagram on the next page. The CNX-PBAR4 allows you to maintain the balanced CAT5 I/O connection to/from rooms 1-4 on the first CNX-BIPAD8, then, via it’s internal balanced to unbalanced audio converter, to... - Page 18 Local Video Source Unbalanced Audio Local Video Source Unbalanced Audio Local Video Source Unbalanced Audio Local Video Source 14 • Professional Audio Distribution Processor: CNX-BIPAD8 (4 Stereo RCA) Local Sound Room 1 System Bi-Directional Balanced Unbalanced Audio/CAT5 Audio CAT5 CNXRMCLV CAT5...
-
Page 19: Programming Software
Earliest Version Software Requirements for the PC Crestron software? Direct software related suggestions NOTE: Crestron recommends that you use the latest software to take advantage of and/or complaints to Crestron via the most recently released features. The latest software is available from the email (software@crestron.com). -
Page 20: Setting The Net Id In Device Settings
NET ID of 44 as shown in the following illustration. NOTE: The first CNX-BIPAD8 in a system is preset with a NET ID of 44 when its symbol is dragged into the upper pane of System Views. Additional units are assigned different NET ID numbers as they are added. - Page 21 SIMPL Windows’ Programming Manager. Detail View of the CNX-BIPAD8 in SIMPL Windows’ Programming Manager The CNX-BIPAD8 symbol is defined by the inputs assigned to its ports. The diagram above shows the symbol associated with the ports of the CNX-BIPAD8 in SIMPL Windows.
-
Page 22: Example Program
Example Program An example program for the CNX-BIPAD8 is available from the Crestron FTP site Crestron FTP site (ftp://ftp.crestron.com/Examples). Search for CNX-BIPAD8.ZIP. It contains the example program, associated files and a README.TXT file that describes the program. -
Page 23: Uploading And Upgrading
Even firmware upgrades are available from the Crestron website as new features are developed after product releases. In those instances, one has the option to upload via the programming software or to upload and upgrade via the Crestron Viewport. - Page 24 Setup | Communications Settings Command 20 • Professional Audio Distribution Processor: CNX-BIPAD8 1. Start SIMPL Windows. 2. From the menu bar, select Tools | Viewport to open the Crestron Viewport. 3. Refer to the figure after this step. From the Viewport menu, select Setup | Communications settings (alternatively, press Alt+D) to open the “Port Settings”...
-
Page 25: Uploading A Simpl Windows Program
1. Verify that the procedure for “Communication Settings” that begins on page 19 has been performed. 2. As shown after this step, select File Transfer | Send Program (alternatively, press Alt+P) from the Viewport menu. Professional Audio Distribution Processor: CNX-BIPAD8 • 21... - Page 26 “Send Program” window. “Send Program” Window 22 • Professional Audio Distribution Processor: CNX-BIPAD8 3. The “Send Program” window appears, as shown after this step. Click Browse, locate the compiled file (.spz for PRO2) and click Open. This will display the program's header information and enable one or both of the What to Send check boxes.
-
Page 27: Firmware Upgrade
Crestron CNX-BIPAD8 Firmware Upgrade A firmware upgrade file has the To take advantage of all the CNX-BIPAD8 features, it is important that the unit extension .upg. contains the latest firmware available. Therefore, please check the Crestron website (http://www.crestron.com/downloads/software_updates.asp) for the latest version of firmware. -
Page 28: Problem Solving
Professional Audio Distribution Processor “Open” Window Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CNX-BIPAD8 Troubleshooting CNX-BIPAD8 does not function. Power LED does... -
Page 29: Further Inquiries
Crestron CNX-BIPAD8 Further Inquiries If, after reviewing this Operations Guide for the CNX-BIPAD8, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team in your area. Dial one of the following numbers. -
Page 30: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 31 Crestron CNX-BIPAD8 Professional Audio Distribution Processor This page intentionally left blank. Professional Audio Distribution Processor: CNX-BIPAD8 • 27 Operations Guide – DOC. 8160A...
- Page 32 Crestron Electronics, Inc. Operations Guide – DOC. 8160A 15 Volvo Drive Rockleigh, NJ 07647 2.03 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.