Establish Communications - Crestron UPX-2 Operation Manual

Universal presentation processor

Hide thumbs Also See for UPX-2:

Table of Contents

Crestron UPX-2

Direct Serial

viii ¥ Universal Presentation Processor: UPX-2

UPX-2 SETUP MENU

Establish Communications

NOTE: Communications is initially established by serial method. Ethernet

communication is recommended for faster sending. Refer to "Establishing

Communication" on page 58 for detailed communications information.

NOTE: This procedure requires Crestron Toolbox. The minimum version of

Crestron Toolbox required to operate with the UPX-2 is version 1.2.10 or later.

1. When the SETUP MENU appears, click the Touch Screen button.

2. In the Use Serial Port For: box, click Console. In the Console Settings box,

select the Baud Rate (115200), select Parity (None), select Data Bits

(Eight), select Stop Bits (One), and enable RTS/CTS. Then click OK.

Universal Presentation Processor

Operations Guide – DOC. 6276C

Table of Contents