Crestron UPX-2 Operation Manual page 43

Universal Presentation Processor
Via Crestron Toolbox
Operations Guide – DOC. 6276C
"Upx Debug Output" Window
NOTE: If the SETUP MENU is not displayed in the center of the screen,
refer to the note on page 22 for instructions on adjusting the display.
1. Establish communication with the UPX-2 as described in "Establishing
Communication" on page 58.
2. Right-click on the device and select Functions | Setup Mode....
"Setup/Calibrate" Window
3. Select Enter Setup Mode. The SETUP MENU will be displayed in the
center of the screen as shown in the following diagram.
NOTE: Select Exit Setup Mode to exit the SETUP MENU.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ 21