Crestron UPX-2 Operation Manual page 52

Crestron UPX-2
Select Project
RGB Video
30 ¥ Universal Presentation Processor: UPX-2
Permits the selection of the UPX-2 program, a .vtz file. The default file location is
the internal flash. To select a project from the internal flash, select Browse and
select the compiled project to be loaded.
If loading an external file, check External as the Project Working Path and use the
Select button to select the network drive and/or flash drive where the compiled
project is located. After selecting the location of the compiled project, select Browse
to find the compiled project file.
NOTE: Selecting the External option permits you to connect to a network drive,
USB devices, and the PC Card ports on the front of the UPX-2.
NOTE: If External is checked, the display list cannot be viewed via Crestron
Toolbox.
After the compiled project has been selected, press Load to load the project to the
UPX-2.
"Select Project" Window – Project to Load
Each one of the video and RGB inputs is selected and adjusted from this window.
Click on an input tab and adjust the settings (resolution, horizontal and vertical
frequency) for the selected input. The selected input is shown on output B.
The "RGB/Video Setup" window can be brought up and hidden using reserved joins
from within a project. Refer to the latest version of the UPX-2 Reference Guide
(Doc. 6286).
The "RGB/Video Setup" window contains the following settings as displayed in the
image. Changes are made in real time.
Universal Presentation Processor
Operations Guide – DOC. 6276C