Component Video Connections - Crestron UPX-2 Operation Manual

Crestron UPX-2
54 ¥ Universal Presentation Processor: UPX-2
S-Video Connections
When connecting S-video cables, make sure to connect one set to one input. Connect
Y to the B input and C to the C input. The A input of VIDEO INPUT 1 and VIDEO
INPUT 2 may be used for a composite video connection. Refer to the following
diagram.
NOTE: If you are using a 4-pin DIN S-video cable, you will need to use a 4-pin
(female) DIN to BNC adapter (adaptor not included).
S-Video Connections
VIDEO INPUT 1/HDTV
A B C
Y C
P
Y P
R
B
S-Video 1

Component Video Connections

When connecting Component video, connect one set of Y, P
connectors. Only VIDEO INPUT 1 supports HDTV. Refer to the following
diagram.
Component Video Connections
VIDEO INPUT 1/HDTV
B C
A
Y C
P P
Y
R
B
Component
Signal 1
The following chart shows the maximum possible video connections that can be
made using both VIDEO INPUT 1 and VIDEO INPUT 2.
NOTE: Only two video sources can be displayed at any one time.
Universal Presentation Processor
VIDEO INPUT 2
A
B C
C
Y
P P
Y
B R
S-Video 2
VIDEO INPUT 2
A B C
C
Y
Y P P
B
R
Component
Signal 2
Operations Guide – DOC. 6276C
, and P to one set of
b r