Hardware Hookup - Crestron TPS-GA-TPI Operation Manual

Crestron TPS-GA-TPI
Hardware Connections for the TPS-GA-TPI
RS-232:
TO COMPUTER,
MOUSE OR
TOUCHSCREEN INPUT*
RGBHV
OUTPUT:
TOUCHSCREEN
VIDEO OUT
GROUND
HEADPHONES
LAN:
10 BaseT/100BaseTX
HIGH SPEED
ETHERNET TO LAN
* Refer to "External Touchscreen" on page 32 for touchscreen input connections.
Operations Guide – DOC. 6609A
Foot Placement for the TPS-GA-TPI

Hardware Hookup

Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to "Network Wiring" on page 12 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the TPS-GA-TPI, use Crestron power supplies for
Crestron equipment.
USB: MEMORY
MOUSE OR EXPANSION:
COMPACT FLASH
INPUT* SLOTS
NET:
TO CONTROL
QUICKMEDIA VIDEO
SYSTEM AND OTHER
AND AUDIO OUTPUT
CRESNET DEVICES
NOTE: The TPS-GA-TPI can only be powered by the 4-position terminal block
connector labeled NET. Crestron recommends an independent power supply for the
TPS-GA-TPI.
®
Isys G-Series Touchpanel Interface
PLACE FEET IN CORNERS
QM OUT:
®
G-Series Touchpanel Interface: TPS-GA-TPI • 31
Isys
RGBHV
INPUT:
VIDEO IN
GROUND
Y, P /Y, P /C/COMP:
B R
VIDEO IN