Crestron UPX-2 Operation Manual page 35

Universal Presentation Processor
Operations Guide – DOC. 6276C
Connectors, Controls & Indicators (Continued)
# CONNECTORS
CONTROLS &
INDICATORS
8 COM
COM
Pin 1
Pin 9
PIN DIRECTION
To UPX-2
1
2 To UPX-2
3 From UPX-2
From UPX-2
4
5 GND
9 NETWORK
Green Yellow
LED LED
NETWORK
Pin 8 Pin 1
10 USB
11 1394
(Continued on following page)
1
, DESCRIPTION
(1) DB9 male, bidirectional RS-232/422/485
port for 3rd-party device control or Touch-
The-PC mouse control;
Up to 115.2K baud;
Hardware and software handshaking support
DESCRIPTION PIN DIRECTION
(RXD-) RS-422 To UPX-2
6
Receive Data
(Idles Low)
(RXD) RS-232 7 From UPX-2
Receive Data
(TXD) RS-232 8 To UPX-2
Transmit Data
(TXD+) RS-422 From UPX-2
9
Transmit Data
(Idles High)
RS-232 & RS-422
Signal Common
(1) 8-wire RJ-45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
PIN SIGNAL
1 TX +
2 TX -
3 RC+
4 N/C
(4) Type A female (1 front, 3 rear);
USB 2.0 ports for DTT, touch/mouse,
keyboard, and storage devices*
* Contact factory for a current list of compatible devices. To
ensure reliable performance, new device drivers are
available only from Crestron through firmware updates.
(1) IEEE 1394b port*
* Contact factory for a current list of compatible devices. To
ensure reliable performance, new device drivers are
available only from Crestron through firmware updates.
Universal Presentation Processor: UPX-2 ¥ 13
Crestron UPX-2
DESCRIPTION
(RXD+) RS-422
Receive Data
(Idles High)
(RTS) RS-232
Request to Send
(CTS) RS-232
Clear to Send
(TXD-) RS-422
Transmit Data
(Idles Low)
PIN SIGNAL
5 N/C
6 RC -
7 N/C
8 N/C