Configuring The Upx-2 - Crestron UPX-2 Operation Manual

Crestron UPX-2
Via Touch Screen
Via USB Keyboard Screen
20 ¥ Universal Presentation Processor: UPX-2

Configuring the UPX-2

The UPX-2 is configured from the SETUP MENU.
NOTE: If a project has not been loaded, or if an invalid project has been loaded, the
touchpanel displays an error message and defaults to the SETUP MENU screen.
If a project is running, the SETUP MENU can be accessed using one of three
methods:
1. At unit startup, when the "Project Loading" progress bar and time
countdown is displayed, press and hold your finger on the touchpanel
display until the text "Loading Setup Screen" is displayed.
2. Press the SETUP button to open the SETUP MENU. The SETUP MENU
will be displayed in the center of the screen.
NOTE: If the SETUP MENU is not displayed in the center of the screen,
refer to the note on page 22 for instructions on adjusting the display.
NOTE: If the touchpanel is out of calibration, the calibration menu will be
displayed. Refer to "Touch Screen" on page 26 for information on
calibrating the touchpanel.
1. Attach a USB keyboard as shown on page v.
2. Open the "Validate User Account Info" window (shown below) by pressing
Ctrl+Alt+Shift on the keyboard.
"Validate User Account Info" Window
3. Enter the user account name, and password and click Validate.
NOTE: The default account name is upxadmin and the default password is
upxadmin. The password is case sensitive. After logging in, the account
name and password can be changed from the "Security" window. Refer to
"Security" on page 23 for more information.
4. When the "UPX Debug Output" window appears (shown in the following
diagram), select Project | Enter Setup Mode to enter the SETUP MENU
(shown on page 22). The SETUP MENU will be displayed in the center of
the screen.
Universal Presentation Processor
Operations Guide – DOC. 6276C