Monitor Output - Barco R9010100 Owner's Manual

3. Press ENTER to select.
4. Push the cursor key ↑ or ↓ to select Communication.
5. Press ENTER to select.
6. Push the cursor key ↑ or ↓ to select Comm. Port.
7. Press ENTER to select.
8. Press ENTER to toggle between [Auto], [XLR], [RS232] and eventually [RF]
Select the corresponding setting. Two are possible in this setup.
Auto The rugged remote listens to according its priority. XLR has the highest priority.
XLR The rugged remote is forced to XLR.
3.5

Monitor output

What can be done ?
A monitor can be connected to this output to preview the projected image.
Pin configuration
Monitor output
1 Red Out
2 Green Out
3 Blue Out
nc
4
5 Ground
6 Ground
7 Ground
R5976690 XLM H25 25/05/2009
8 Ground
nc
9
10 ground
nc
11
nc
12
13 Hor. Sync
14 Vert. Sync
3. Connections
35