Installation; Start Up Of The Installation Mode; Input Slots - Barco R9010100 Owner's Manual

7. INSTALLATION

Overview
•

Start up of the installation mode

•

Input slots

• Configuration
• Lens
• Tilt adjustment
• Internal Patterns
• Quick Access Keys
• Buttons
• Macros
7.1 Start up of the installation mode
Start up
1. Push the cursor key ↑ or ↓ to highlight Installation. (menu 7-1)
2. Press ENTER to select.
The Installation mode will be displayed. (menu 7-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-1
7.2 Input slots
What can be done ?
The input configuration of the variable inputs is shown in the Input slots menu.
To view or the change the input configuration.
1. Push the cursor key ↑ or ↓ to highlight Input Slots.
2. Press ENTER to select.
The input slots menu will be displayed. (menu 7-3)
INPUT SLOTS
Slot Module type [config]
1. d320 SDI
2. d320 HDSDI
3. d320 DVI
4. d320 RGB AN UXGA
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 7-3
R5976690 XLM H25 25/05/2009
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-2
7. Installation
87