2. Installation Guidelines
7. Secure the correct position by turning in both spring lock screws.
8. While the side cover is open, check the manometer. The manometer is situate on the top right of the lamp house compartment.
(image 2-9)
The pressure should be ± 1 bar. When lower than 0.5 bar, a corrective action should be taken by qualified service personnel.
9. Hook on the side cover and close the 3 quarter turn fastener studs a quarter turn clockwise.
Image 2-7
Removing side cover
Image 2-8
Lamp insertion
Image 2-9
Cooling liquid pressure
16
R5976690 XLM H25 25/05/2009