Window Adjustment; Start Up - Barco R9010100 Owner's Manual

5. Adjust the red balance with the ← or → cursor keys until the red noise becomes visible in the black areas.
6. Adjust the blue balance with the ↑ or ↓ cursor keys until the blue noise becomes visible in the black areas.
7. Increase the brightness until the black areas displays approximately 50% white noise.
8. Correct Red and Blue Black balance adjustment in such a way the blue and red noise are just visible and a small brightness
increase maintain a grey color.
PICTURE TUNING
COLOR SPACE
COLOR TEMPERATURE
GAMMA
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-40
Use Default to return to the factory settings.
Checking the white balance
There is no adjustment procedure for the white balance.
6.5

Window Adjustment

Overview
•

Start up

• Select Source
• Size Adjustment
• Window Position
• Z-order
• Color Key
• Alpha Blending
• No Signal
• Exit the Window adjustment menus
6.5.1 Start up
Start up
The window manipulations can be managed with the Window Adjustment menus. To start up the Window Adjustment :
1. Push the cursor key ↑ or ↓ to highlight Window adjustment. (menu 6-42)
2. Press ENTER to select.
The window adjustment menu will be displayed. (menu 6-43)
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
WINDOW ADJUSTMENT
LAYOUT ADJUSTMENT
SCENERGIX
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-42
R5976690 XLM H25 25/05/2009
INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Adjust red with ↑ or ↓
blue with ← or →
Menu 6-41
WINDOW ADJUSTMENT
SELECT SOURCE
SIZE
POSITION
Z-ORDER
COLOR KEY
ALPHA BLEND
NO SIGNAL COLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-43
6. Adjustment Mode
65