Table of Contents
Advertisement
2. Installation Guidelines
Image 2-12
Battery removal
2.9
Battery insertion in the Rugged remote control
Batteries
The rugged remote control is delivered with 6 rechargeable NiCd batteries, type AA.
Expected charge and discharge cycles : 1000
When replacing the batteries, all batteries should be replaced at the same time.
C
AUTION
How to insert the batteries ?
1. Turn off the remote and remove all cables.
2. Turn the locking screw counter clockwise to free the metallic cover. (image 2-13)
3. Open the metallic cover.
4. Insert the new batteries correctly in the battery compartment. (image 2-14)
Be sure to install the batteries in the proper polarity and not to short battery terminals together.
5. Set switch A in the Charge position (left position).
6. Close the metallic cover.
7. Turn the locking screw clockwise to lock the metallic cover.
Image 2-13
Open the battery cover
18
:
Risk of explosion if the batteries are replaced by an incorrect type.
Image 2-14
Charge switch
A
Charge switch
R5976690 XLM H25 25/05/2009
Advertisement
Table of Contents
