Color Key Algorithm; Color Key Palette Set Up - Barco R9010100 Owner's Manual

3. Use the ↑ or ↓ arrow keys to change to the desired value.
COLOR KEY
Status [off]
Color value
Red 0
Green 0
Blue 0
Options
Range 0
Algorithm None
Palette RGB
Select with ↑ or ↓
ENTER, ←, → to change value
<EXIT> to return
Menu 6-52
6.5.6.4

Color key algorithm

What can be set up ?
The way the image processor should process the set up color and range.
Color key algorithm
1. Select Algorithm. (menu 6-53)
2. Press ENTER to toggle between the possible value.
The value can be:
higher
lower
equal
inside range
outside range
COLOR KEY
Status [off]
Color value
Red 0
Green 0
Blue 0
Options
Range 0
Algorithm None
Palette RGB
Select with ↑ or ↓
ENTER, ←, → to change value
<EXIT> to return
Menu 6-53
6.5.6.5

Color key palette set up

What can be specified ?
With the palette setting, the color tint can be defined. When on RGB, the full color palette can be used for color keying. When only
blue, green or red is selected, only color tints of these colors can be used for color keying.
Color key palette set up
1. Select Palette. (menu 6-54)
2. Press ENTER to toggle between RGB, Green, Red or Blue.
R5976690 XLM H25 25/05/2009
all colors higher that the set up color values (range) will be replaced.
all colors lower that the set up color values (range) will be replaced.
all colors equal to the colors set up will be replaced.
all colors within the range will be replaced.
all colors outside the range will be replaced.
6. Adjustment Mode
71